Click image to view full size image
LED Explosion Proof Street Lamp BLD115
Scope Of Application:
1. Suitable for areas 1 and 2 in explosive gas environments.
2. Suitable for IIA, IIB, IIC explosive gas environment.
3. Suitable for environments with temperature group T1 ~ T6.
4. Suitable for hazardous environments such as petroleum extraction, storage, chemical industry, medicine, military industry and military facilities.
5. Suitable for energy-saving renovation projects and places where maintenance and replacement are difficult.
6. Widely used for normal lighting or emergency lighting in factory.
Normal Working Conditions:
1. The altitude of the installation site does not exceed 2000m.
2. The ambient ambient temperature is -40 ℃ ~ + 40 ℃, and the average temperature value within 24h does not exceed + 35 ℃.
3. The relative humidity of the surrounding air is not more than 95% (+ 25 °C).
4. In a place without severe vibration, shock and swing.
5. Suitable for Zone 1, Zone 2, IIA, IIB, IIC and T1 ~ T6 group explosive gas environment or flammable dust place.
Technical Parameters:
Type |
I |
II |
Executive standard |
GB3836 (equivalent to IEC60079, EN series standards) / GB12476 (equivalent to IEC61241, EN series standards) |
|
Explosion-proof mark |
Exd IIC T6 Gb/ExtD A21 IP66 T80℃ |
|
Rated voltage |
85-265VAC |
|
Frequency range |
50Hz |
|
Rated power |
20W-70W |
80W-120W |
LED luminous flux |
2600-9100lm |
10400-15600lm |
Power factor |
≥0.95 |
|
Power efficiency |
≥0.88 |
|
Color rendering index |
≥80 |
|
Surge current |
Cold start/Cold; 30A (max) 230VAC |
|
Safety regulations |
UL8750, TUV EN61347-1, EN61347-2-13 |
|
EMC standard |
EN61000-3-2, TUV EN61347-1, EN61347-2-13 |
|
IP Grade |
IP66 |
|
Anticorrosion grade |
WF2 |
|
Inlet thread |
G3/4” |
|
Cable specification |
Φ7-Φ12mm |
|
Installation mode |
Ceiling type, wall type 30 °, wall type 90 °, pipe suspender type (length can be customized), guardrail upright type, flange upright type |
|
Working environment |
Temperature: -40~45℃ Humidity: 10%~90% |
|
Working life |
≥50000H |
|
Weight |
2.8kg |
5.2kg |
Note:
● The above light distribution curve and distance height ratio are bld116-l50.
● The above illuminance values are only for model selection reference. With the continuous improvement of LED light efficiency, the illuminance values will increase accordingly.
http://www.zjrhfb.com/